Redefining a Key
The Cox Universal Remote control can be set up to control a second TV or VCR, or any combination of up to four home entertainment devices. For example, to have the unit control a TV, a Cable Converter, and two VCRs, you will need to re-assign the unused AUX key to operate the second VCR as follows:
- On the remote control, press VCR once. Then press and hold SETUP until the VCR key blinks twice, then release SETUP
- Enter 9-9-2. The VCR key will blink twice.
- Press VCR once, then press AUX once. The VCR key will blink twice.
- The AUX key is now ready to be programmed for your second VCR.
To re-assign other device keys, repeat steps 1-4 and substitute the key sequence using the following chart:
| To Re-Assign | Perform Key Sequence |
| TV as 2nd VCR key | SETUP-9-9-2-VCR-TV |
| TV as 2nd Auxiliary key | SETUP-9-9-2-AUX-TV |
| TV as 2nd Cable key | SETUP-9-9-2-CABLE-TV |
| TV back to TV | SETUP-9-9-2-TV-TV |
| VCR as 2nd TV key | SETUP-9-9-2-TV-VCR |
| VCR as 2nd Auxiliary key | SETUP-9-9-2-AUX-VCR |
| VCR as 2nd Cable key | SETUP-9-9-2-CABLE-VCR |
| VCR back to VCR | SETUP-9-9-2-VCR-VCR |
| AUX as 2nd TV key | SETUP-9-9-2-TV-AUX |
| AUX as 2nd VCR key | SETUP-9-9-2-VCR-AUX |
| AUX as 2nd Cable key | SETUP-9-9-2-CABLE-AUX |
| AUX back to AUX | SETUP-9-9-2-AUX-AUX |
Upon completion of a re-assignment, the selected mode key will blink twice to confirm your selection. Then, you'll need to program device control.
|
