REMOTE SUPPORT by
HOME | | | |

Related Links



Volume Lock

The Cox Universal Remote Control is set to control volume of a device through your TV while in the TV, VCR, or Cable mode. However, in the Auxiliary mode, you will still have separate control of your auxiliary device's volume.

If your TV is not remote controllable, or if you would like the volume to be controlled by a different device, you can change the Volume Lock setting to control a volume through a non-associate mode (for example, through the cable in the TV mode).

To change Volume Lock to CABLE mode:

  1. On the remote control, press CABLE once. Then press and hold SETUP until the CABLE key blinks twice, then release SETUP.
  2. Enter 9-9-3. The CABLE key will blink twice.
  3. Press CABLE once. It will blink twice.
  4. Now, whenever you press VOL+, VOL-, or MUTE, volume will be controlled by your Cable Converter.
To change Volume Lock to TV mode:

  1. On the remote control, press TV once. Then press and hold SETUP until the TV key blinks twice, then release SETUP
  2. Enter 9-9-3. The TV key will blink twice.
  3. Press TV once. It will blink twice.
  4. Now, whenever you press VOL+, VOL-, or MUTE, volume will be controlled by your TV.
To change Volume Lock to VCR mode:

  1. On the remote control, press VCR once. Then press and hold SETUP until the VCR key blinks twice, then release SETUP.
  2. Enter 9-9-3. The VCR key will blink twice.
  3. Press VCR once. It will blink twice.
  4. Now, whenever you press VOL+, VOL-, or MUTE, volume will be controlled by your VCR
To change Volume Lock to AUX mode:
Note: Performing these steps will allow you to access the volume control of your auxiliary device in all modes.

  1. On the remote control, press AUX once. Then press and hold SETUP until the AUX key blinks twice, then release SETUP.
  2. Enter 9-9-3. The AUX key will blink twice.
  3. Press AUX once. It will blink twice.
  4. Now, whenever you press VOL+, VOL-, MUTE, the volume will be controlled by your auxiliary device.