 |
Related Links
|
 |
|
 |
Setup (Programming TV Control)
The Delta remote control is pre-programmed at the factory to operate the Digital Adapter. The UEI Delta remote also contains a universal TV library to allow you to control the Powr and Volume of your TV. .
- Turn on the TV.
NOTE: Please read steps 2 to 4 completely before proceeding. Highlight or write down the codes and device you wish to program before moving on to step 2.
- Press and hold SET until the RED Light blinks twice, then release SET..
- Locate the code for your device in Manufacturer's Codes on the back of this user guide. Brands are listed in alphabetical order with the most popular codes listed first.
- Enter the first five-digit code for your TV. If you perform this procedure correctly, the Red Light will blink twice.
NOTE: If you enter an invalid code, the red light will display one long blink and exit the programming mode. Repeat steps 2 to 5 with valid code.
- Aim the remote control at your TV and press Power once. The device should turn off. If it does not respond, repeat steps 2 to 4, trying each code listed for your brand until you find one that works. If it still does not work, try Searching For Your Code.
Code Lookup
|
 |
|
