PROGRAMMING DEVICE CONTROL
The Comcast Custom 3-Device universal remote control is preprogrammed at the factory to operate the Cable Box supplied by your Comcast system, an RCA TV, and an RCA VCR (in the AUX mode). To control devices other than default brands (excluding the Cable Box), perform the below steps.
- Turn on a device (e.g., VCR or DVD Player) and, if applicable, insert media, (e.g., video cassette or disc). Note: Please read steps 2 to 6 completely before proceeding. Highlight or write down the codes and device you wish to program before moving onto step 2.
- On the remote control, press a device key once (i.e., AUX or TV).
- Press and hold Setup until the selected mode key blinks twice, then release Setup.
- Locate the code for your device in Manufacturer's Codes (manual). Brands are listed in alphabetical order with the most popular codes listed first.
- Enter the first five-digit code for your device. If you perform this procedure correctly, the selected mode key will blink twice. Note: If you enter an invalid code, the selected mode key will display once long blink and exit the programming mode. Repeat steps 2 to 5 with a valid code.
- Aim the remote control at your device adn press Power once. The device should turn off. If it does not respond, repeat steps 2 to 6, trying each code listed for your brand until you find one that works. If it still does not work, try Searching For Your Code. Note: If the device does not have a Power key press Play. Note: If the device does not have a Power key, press the Play key.
|
