Channel Volume Lock

Volume Lock allows you to control the volume through the device identified as having your primary speaker regardless of which mode you are using. On the Atlas 1055 Universal Remote, Global Volume Lock is set to TV, so you can control TV volume while in the AUX, DVD, TV, CBL mode. You can perform Individual Volume Unlock on a selected device to set its volume control for independent operation.

Note: The audio mode's (AUD) volume controls are active regardless of Volume Lock settings. However, if you lock the volume controls of the AUD mode, you will have control of the audio device's volume in all other modes (i.e., AUX, DVD, TV, and CBL). This can be an advantage if, for example, you always listen to home entertainment devices through your receiver's speakers.

Unlocking Volume Control for a Sinble Device

1. Assuming Global Volume Lock is active, select a mode on the remote control that you want to unlock (e.g., CBL) and press it once. Next, press and hold SETUP until the device key blinks twice.
2. Enter 9 9 3. The last selected device key will blink twice.
3. Press VOL- once. The last selected device key will blink four times.
4. Repeat steps 1 through 3 for each device you want volume to be unlocked.

Now, after you select a device that has volume unlocked, pressing VOL+, VOL- or MUTE will control only that device's volume.

Unlocking All Volume Control

1. On the remote control, press and hold SETUP until the last-selected device key blinks twice.
2. Enter 9 9 3. The last-selected device key will blink twice.
3. Press VOL+ once. The last-selected device key will blink four times.

Locking Volume Control to One Mode

Note: The audio mode's volume controls are active regardless of Volume Lock settings. However, if you lock the volume controls to the AUD mode, you will control the audio device's volume in all other modes (i.e., AUX, DVD, TV, or CBL). This can be an advantage if, for example, you always listen to home entertainment devices through your receiver's speakers.

1. On the remote control, press and hold SETUP until the last-selected device key blinks twice.
2. Enter 9 9 3. The last-selected device key will blink twice.
3. Select a mode (e.g., TV or AUD) which you want to use to control the volume. The selected device key will blink twice.

Now, when you press VOL+, VOL-, or MUTE, the volume of the selected device (e.g.,TV) is controlled regardless of mode.