Programming ID Lock

The Atlas 1055 Universal Remote Control is locked at the factory to operate a Scientific Atlanta cable converter. However, if you have another brand or model of cable converter or satellite service that you would like to control, then you'll need to perform the following steps to unlock the ID Lock, enter a new manufacturer's code, and lock the ID lock again.

1. Turn on the cable converter.
2. On the remote control, press CBL once; it will blink once. Then press and hold SETUP until the CBL key blinks twice.
3. Enter 9 8 2. The DBL key will blink four times, indicating ID Lock is unlocked.
4. Perform the instruction under "Programming Device Control" on manual to program device control for the desired cable converter or satellite receiver. When you are done, preform steps 5 and 6 to again lock the ID Lock.
5. On the remote control, press CBL once; it will blink once. Then press and hold SETUP until the CBL blinks twice.
6. Enter 9 8 2. The CBL key will blink twice, indicating ID Lock is again locked.