REMOTE SUPPORT by
HOME | | | |

Related Links



Setup (Programming TV Control)

The Delta remote control is pre-programmed at the factory to operate the Digital Adapter. The UEI Delta remote also contains a universal TV library to allow you to control the Powr and Volume of your TV. .

  1. Turn on the TV.
    NOTE: Please read steps 2 to 4 completely before proceeding. Highlight or write down the codes and device you wish to program before moving on to step 2.
  2. Press and hold SET until the RED Light blinks twice, then release SET..

  3. Locate the code for your device in Manufacturer's Codes on the back of the user guide or in the lookup below. Brands are listed in alphabetical order with the most popular codes listed first.

  4. Enter the first five-digit code for your TV. If you perform this procedure correctly, the Red Light will blink twice.
    NOTE: If you enter an invalid code, the red light will display one long blink and exit the programming mode. Repeat steps 2 to 5 with valid code.

  5. Aim the remote control at your TV and press Power once. The device should turn off. If it does not respond, repeat steps 2 to 4, trying each code listed for your brand until you find one that works. If it still does not work, try Searching For Your Code.


Code Lookup