REMOTE SUPPORT by
HOME | | | |

Related Links



UEI Code Finder


Programming Device Control

The Shaw Direct IRC600 and URC600 Remote Controls are preprogrammed to operate a Motorola satellite receiver, a Sony TV, and Sony DVD player. To program devices other than the default brands, perform the following steps; otherwise skip this section.



1.

Turn on the TV or Auxiliary device.
     
  NOTE: Please read steps 2 to 4 completely before proceeding. Write down the codes and device you wish to program before moving on to step 2.
     
  2.
Press the OPTIONS button to display the Options screen on your TV.
     
  3. Locate the code for your device in Manufacturer’s Codes on the back of this user guide or using the online Code Finder above.
     
  4. Enter the first five-digit code for your TV or Auxiliary Device.

If you perform this procedure correctly, the Red Light will blink twice.
     
  NOTE: If you enter an invalid code, the red light will not blink when entering the last digit and exit the programming mode. Repeat steps 2 to 4 with a valid code.
     
  5. Aim the remote control at your TV or Auxiliary Device and press Power once. The device should turn off. If it does not respond, repeat steps 2 to 4, trying each code listed for your brand until you find one that works. If it still does not work, try Searching For Your Code.
   
6. The TV or Auxiliary Device code will be stored in the remote control and will be automatically reprogrammed when the batteries are changed.