Control your entire entertainment system with our advanced remote. Program your remote and set your viewing preferences to watch and record your favorite shows just the way you want.


Simplified Modeless Control

All keys on the remote are dedicated to controlling your DIRECTV receiver except for the VOLUME, and MUTE, and INPUT keys. The ON and OFF keys control both the receiver and programmed TV.

Hide Your DIRECTV Receiver

This remote control is capable of controlling a receiver that is hidden from sight once it has been paired with the box.


Setup your Remote


CodeFinder and Setup Instructions

Step 1: CodeFinder

Step 2: Setup Instructions


Remote Functions


  • Turns both DIRECTV receiver and TV on or off at the same time


  • Displays the onscreen guide


  • Displays the main menu


  • Displays the list of recorded programs


  • Record program now playing or highlighted in onscreen guide


  • Exit the menu or stop playback


  • Press to delete recorded shows from playlist


  • Display information about the program now playing or highlighted in the guide


  • Replay previous six seconds


  • Return to previous channel


  • Press for guide options within onscreen guide


  • Press for mini guide when viewing program


Frequently Asked Questions

This remote uses AA size batteries.

While Heavy Duty batteries will work, alkaline batteries are recommended and will have much longer battery life.

To control your equipment, be sure to do the following:

  • Point the remote at the equipment when using it, making sure that there is a clear line of sight.
  • The LED on the remote should blink with each keypress. If not, replace the batteries.
  • The remote needs to be programmed in order to control your equipment.
  • Follow the instructions in the setup section of this site to program the remote.

To test battery strength, press and hold any button on the remote:

  • If LED is a solid green light the batteries are strong.
  • If LED is a fast blinking light, batteries might need to be replaced soon.
  • If LED is blinking slow or is not lit your remote needs new batteries.

If the buttons on your remote are not responding, try resetting the receiver:

  • On most DIRECTV receivers you can locate a red button on the side or inside the access card door.
  • Press and hold the red button until it restarts.

If restarting your receiver did not help, try resetting the remote:

  • Press MENU on the remote.
  • Move cursor to Settings and press SELECT.
  • Go to Remote Control and press SELECT.
  • Select Pair/Program Remote. Depending on your setup, this may be automatic or you may have to enter a code into your remote. Use the Codefinder tool on this page to find the 5-digit code.