Ecolink Zigbee Alarm Listener FFZB1-ECO

The FireFighter™ sensor is designed to listen to the alarm sounder of any smoke detector

Features

Advanced Sensing

Keeps an “ear” on smoke/CO detectors and notifies a home management system when either of these detector’s alarms go off.

Tamper Detection

Notifies your system when someone tampers with the sensor.

Wireless Operation

Battery powered Zigbee network operation enables installation flexibility.

Setup

Connected Home Setup

Setup Instructions

FAQ

Frequently Asked Questions

The sensor pacakge includes:
1 x Firefighter Wireless Audio Detector
1 x Mounting Plate
2 x Mounting Screws
1 x CR123A battery
1 x Installation Manual
2 x Double sided tape

NOT INCLUDED:
Smoke/CO Detector

The FireFighter™ must be mounted within 6 inches of the detector for optimal operation.

The sensor uses 1 Lithium CR123A battery.

The sensor is a Zigbee compliant device and can participate in any standard Zigbee network.

The sensor implements a radio-frequency (RF) communication protocol that allows the sensor to communicate with your system in the event of an audio alarm detection.

The sensor implements a check-in process by which it contacts the system on a periodic basis and provides an update of its operational state.

Yes. You can have multiple Firefighter sensors operating on the same network/system. Please consult with your system provider to deteremine if there is a limit on the total number of devices that can be associated with your system.

You can find self-help articles at the following site: https://discoverecolink.com/support/. Alternatively, you can request support via email by writing to [email protected]