Ecolink Z-Wave Motion Sensor PIR-ZWAVE2.5-ECO

The PIRZWAVE2.5-ECO is a battery-powered motion sensor for home security or home automation applications


Advanced Sensing

Senses the presence of motion within a room (pet immunity up to 85 lbs.) and sends notifications to your security system or home automation platform.

Tamper Detection

Notifies your system when someone tampers with the sensor.

Wireless Operation

Battery powered Z-Wave network operation enables installation flexibility.


Connected Home Setup

Setup Instructions


Frequently Asked Questions

The sensor pacakge includes:
1 x PIRZWAVE2.5-ECO Sensor
1 x Mounting bracket
1 x Jumper
4 x Mounting Screws
1 x CR123A battery
1 x Installation Manual
3 x Mounting Adhesive

The distribution pattern of the motion detector is approximately +/- 50 degrees left and right of center and at maximum sensitivity will reach a maximum of approximately 45 feet.

The sensor uses 1 CR123A battery.

The sensor is a Z-wave compliant device

The sensor implements a check-in process by which it contacts the system on a periodic basis and provides an update of its operational state.

Yes. You can have multiple sensors operating on the same network/system. Please consult with your system provider to deteremine if there is a limit on the total number of devices that can be associated with your system.

You can find self-help articles at the following site: Alternatively, you can request support via email by writing to [email protected]